The Centrifuge for animal oil treatment. Before running, the power should be cut off and the centrifuge brake should be released. In operation, the drum can be turned by hand to see if there is any biting. Turn on the power and start it in a clockwise direction (usually about 40-60 seconds from standstill to normal operation).
After the centrifuge is used for animal oil treatment, it must be empty for about 3 hours, and it can work without abnormal conditions. Place the material as evenly as possible. Must be operated by a person, the capacity must not exceed the rated amount. Never overspeed the machine to avoid affecting the life of the machine.
The centrifuge is used for animal oil treatment. After the start, if there is an abnormal situation, it must be repaired with disassembly and wash. The centrifuge is running at high speed, so it is not possible to touch the drum with the body to prevent accidents. The mesh size of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, the filter cloth should be installed when the filter cloth is installed.
Centrifuge for animal oil treatment To ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and replace it severely; the bearing cover has no oil leakage.