Home > Exhibition > Content

Details that can't be ignored when using a decanter centrifuge

May 24, 2019

Although the use of the decanter centrifuge has many functions, it is generally necessary to use it in accordance with the normal method without fear of quality problems.

 

Before the decanter centrifuge is turned off, the power should be cut off and the brake of the decanter centrifuge should be loosened first. You can manually turn the drum to see if there is any bite. Check other parts for looseness and abnormality.

 

Turn on the power and start it in a clockwise direction (usually about 40-60 seconds from standstill to normal operation). Usually, each equipment must be empty for about 3 hours after it arrives at the factory. It can work without abnormal conditions.

 

Place the material as evenly as possible. Must be operated by a person, the capacity must not exceed the rated amount.

 

Never overspeed the machine to avoid affecting the life of the machine. After the machine is started, if there is an abnormal situation, it must be stopped for inspection and repaired if necessary. The decanter centrifuge operates at high speed, so it is not possible to touch the drum with the body to prevent accidents.

 

The mesh size of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, when installing the filter cloth, insert the filter cloth sealing ring into the drum sealing groove to prevent the material from running in.

 

In order to ensure the normal operation of the decanter centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and replace it severely; the bearing cover has no oil leakage. After the machine is used, it should be cleaned and kept clean.

 

Do not separate the non-corrosion-type horizontal screw centrifuge from highly corrosive materials. In addition, strictly follow the equipment requirements and regulations. Non-explosion-proof horizontal screw centrifuges should not be used in flammable or explosive places.

In short, everyone must pay attention to the careful maintenance of the decanter centrifuge when it is used daily, which can effectively extend its service life.

 

https://www.bscentrifuges.com/