Home > Exhibition > Content

Empty car operation and parking check of fish meal centrifuge

Aug 30, 2019

The fish meal centrifuge cuts off the power before running and first releases the centrifuge brake. You can manually turn the drum to see if there is any bite. Check for other parts of the area for looseness and abnormality. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from standstill to normal operation).

 

Fishmeal centrifuges usually have to run empty for about 3 hours after each device arrives at the factory. It can work without abnormal conditions. Place the material as evenly as possible. Must be operated by a person, the capacity must not exceed the rated amount. Never overspeed the machine to avoid affecting the life of the machine.

 

After the fishmeal centrifuge is started, if it has abnormal conditions, it must be stopped for inspection and repaired if necessary. The centrifuge is running at high speed, so it is not possible to touch the drum with the body to prevent accidents. The mesh size of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, when installing the filter cloth, insert the filter cloth sealing ring into the drum sealing groove to prevent the material from running in.

 

In order to ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon, whether the components in the brake device are worn, severely replaced, and whether the bearing cover has oil leakage.

 

https://www.bscentrifuges.com/