Food decanter centrifuge maintenance
In order to better complete the production operation, it is necessary to properly maintain and maintain the food decanter centrifuge. Among them, the rotary drum is a key component of the food decanter centrifuge. Therefore, in daily operations, particular attention must be paid to the inspection and maintenance of the rotary drum. Then come together to understand the specific content.
First of all, before starting the food decanter centrifuge, the on-site operator needs to check first, especially if the brake system is normal. Staff can turn the drum by hand to see if there is a bite. At the same time check other parts for looseness and abnormal conditions.
Secondly, after checking and confirming, it is necessary to power on the food decanter centrifuge and start it in a clockwise direction. Under normal circumstances, it takes about 40-60 seconds for the equipment to go from a standstill to normal operation. Moreover, it is only after the equipment has been idle for a period of time to confirm that there is no abnormality before it can officially start work.
Third, it is necessary to pay attention to the operation process. In order to ensure the stable operation of the food decanter centrifuge, the material should be placed as evenly as possible. Must be someone to operate, the capacity must not exceed the rated amount.
In addition, during the operation of food decanter centrifuges, it is also necessary to strictly control the rotation speed of the food decanter centrifuges, and must not be overloaded so as not to affect the service life of the machine. After the machine is started, if there is any abnormality, it must be stopped and checked. If necessary, it must be dismantled and repaired.
In addition, since the food decanter centrifuges have been operating at a high speed, the on-site operators must not only ensure the safe operation of the equipment, but also protect themselves. They must not touch the drums with their bodies to prevent accidents. After the food decanter centrifuge is used, clean work should be done to keep the machine clean.