Horizontal spiral centrifuge, if the frequency conversion technology is used on it, then, in the debugging process, if there are some considerations from the load characteristics of the centrifuge, the main ones are:
(1) The load starting torque of the centrifuge is relatively high at this point, and therefore, problems such as difficulty in starting may occur. Therefore, the torque compensation value of the inverter can be appropriately increased. However, it should be noted that the compensation amount should not be too large, so as to avoid the phenomenon of overcurrent and overload of the centrifuge.
(2) If the inertia of the centrifuge is relatively large, then if you want to stop at the specified deceleration time, you can add a brake unit to the machine to achieve this.