Good maintenance methods can effectively increase the life of the centrifuge and help enterprises effectively improve production efficiency and profits. Let ’s take a look at how the centrifuge performs daily maintenance with Xiaobian!
Before operating the centrifuge, you should cut off the power supply and release the brake of the centrifuge. You can try to roll the drum by hand to see if it is biting and braking.
Check for looseness and abnormal conditions in other parts;
Turn on the power and drive in a clockwise direction (usually it takes about 40-60 seconds from the stationary state to normal operation);
Generally, each device must be operated empty for about 3 hours after arriving at the factory, and can be operated without abnormal conditions;
Materials should be placed as evenly as possible;
It is necessary to have a person to operate it, and the capacity must not exceed the rated amount.
It is strictly prohibited to operate the machine at an excessive speed, so as not to affect the service life of the machine;
After the machine is started, if there is an abnormal situation, it is necessary to park and inspect it, and it needs to be disassembled, washed and repaired if necessary;
The centrifuge is operated at a high speed, so do not touch the drum with your body to prevent accidents;
The mesh size of the filter cloth should be determined according to the size of the solid phase particles of the separated materials, otherwise the separation effect will be affected. In addition, the filter cloth should be used in the filter cloth equipment; the sealing ring is embedded in the drum sealing groove to prevent the material from running in;
To ensure the normal operation of the centrifuge, please refuel and maintain the rolling parts every 6 months. Check the lubrication status of the bearings at the same time for wear; whether the components in the brake equipment are worn, and they should be replaced seriously; whether there is oil leakage in the bearing cover; after the machine is used, clean the work and keep the machine tidy ;
Do not separate non-corrosive centrifuges from highly corrosive materials; otherwise, operate strictly in accordance with equipment requirements and regulations. Non-explosive centrifuges must not be used in flammable and explosive situations.