In order to ensure product quality, high speed 3 phase centrifuges are used in the production process. Only the materials that need to be separated enter the high-speed three-phase centrifuge through the central feed pipe, and the dense solids will settle under the action of centrifugal force. To the drum wall.
In high speed 3 phase centrifuges, the clear liquids with different densities of two phases form concentric cylinders, the lighter liquid phase is in the inner layer, and the heavier liquid phase is in the outer layer. The thickness of the different liquid rings can be varied by adjusting the overflow weir and the variable impeller. The solids deposited on the drum wall are conveyed by the screw conveyor to the cone end of the drum body and discharged from the discharge port into the solids accumulation tank.
High speed 3 phase centrifuge control system uses advanced PLC, mainly by the rack, CPU processing module, signal module, function module, interface module, communication processor, power module and other components. In order to prevent problems in the high-speed three-phase centrifuge system, reasonable improvements were made to the defects in the process and system control.