Home > Exhibition > Content

What should you pay attention to when using horizontal decanter centrifuge?

Horizontal decanter centrifuge has a significant separation effect, can be used for various industries in the separation process, but the good use of results can not be separated from the correct use of equipment. Then in the horizontal subsidence centrifuge, what details need to pay attention to it?

 

When using horizontal decanter centrifuge, shall not flammable, toxic, and corrosive, radioactive substances as its separation object. Therefore, the horizontal sedimentation centrifuge must be prepared for the material after it has been determined and the requirements of the instructions must be adhered to when installing the machine.

 

Do not operate horizontal decanter centrifuges with warning signs that are either damaged or unmarked because of the high risk of such machines; during use, if the drum of a horizontal decanter centrifuge Ice water, frozen or have a hard substance or its vibration amplitude has more than 24mm / s, then immediately shut down for maintenance.

 

For safety reasons, it is forbidden to use horizontal decanter centrifuge in the absence of belt guard and other protective equipment. At the same time, do not forget to regularly check all the automatic cut-off devices in the equipment and the monitoring system to ensure their normal operation.

 

Defects, dents, voids, or grooves occur in important components such as drums, motors, or support racks of a horizontal decanter centrifuge, or the direction of rotation of the motor is opposite to the direction of the indicated arrow, and the machine is not fully installed When it is done, you can not start the machine.

 

In summary, horizontal decanter centrifuges should be inspected and maintained on a regular basis. When disassembling, installing or operating, operating and servicing the machine, follow the normal procedure. Only technically trained technicians should be able to operate and clean , Dismantling and installing horizontal decanter centrifuges.


WUXI CITY BISHUN MACHINERY MANUFACTURING Co., Ltd

Add:Zhongdong Industrial Area, Houqiao,Xishan District,Wuxi City,Jiangsu Province,China

Contact:Xiaodong Yao

Mob: 0086-13921295188

Tel: 0086-510-88725588

Fax: 0086-510-88725568

Email: sales@wxbishun.com

Website: http://www.bscentrifuges.com